RM-PRO™ DIVIDER Glass
Structural Aluminum Privacy Divider System
Privacy and wind screening between adjacent balconies, engineered to the same structural standard as the guard.
- Mounting
- Top-mounted / Fascia-mounted
- Infill
- Glass or panel
- Fabrication
- Welded or mechanical
- Post profile
- Structural divider post; welded or mechanically fastened
- Glass capture
- Separate glass channel
- Field adjustment
- Fixed once installed
- Maximum height
- 1800 mm
- Catalogue
- RM Product Line Vol. 2, pp. 36–38
System overview
The RM-PRO™ DIVIDER Glass is a structural aluminum privacy divider system designed to provide visual screening, wind mitigation and architectural separation between adjacent balcony and terrace spaces.
Structural aluminum framing with laminated glass or panel infill is available in mechanically fastened or welded configurations depending on project requirements.
Suitable for residential, commercial and hospitality developments where durable, low-maintenance privacy solutions are required.
Configuration
- Structural aluminum posts and base components engineered for divider and screening applications
- Available in mechanically fastened or welded configurations depending on structural and design requirements
- Glass infill panels set within aluminum framing or channel systems
- Variety of glass and panel options including laminated, fritted, tinted, opaque and decorative configurations
- Fixed, rigid system once installed and secured
- Modular fabrication supporting multiple heights, widths and layout configurations
- Suitable for high-rise, mid-rise and low-rise applications
Materials
- Structural aluminum components fabricated from 6061-T6 (mechanically fastened systems) or weld-appropriate alloys including 6061-T6, 6005A-T6 and 6063-T6 (welded systems)
- Laminated safety glass or architectural panel infill
- Stainless steel fasteners and concealed hardware
- Isolation materials incorporated to mitigate galvanic interaction and moisture intrusion
Fabrication
- Shop-fabricated assemblies produced under controlled manufacturing procedures
- Mechanically assembled or welded structural components depending on configuration
- Modular panel fabrication supports efficient installation and consistent alignment
- Surface preparation completed prior to architectural finishing
Mounting & anchorage
- Top-mounted, fascia-mounted or integrated mounting configurations available
- Anchorage engineered based on substrate and loading requirements including wind and occupant interaction
- Concealed mechanical anchorage systems utilized where required
- Coordination with waterproofing and façade assemblies supported
Performance & code compliance
Designed to meet or exceed:
- Ontario Building Code (2012) provisions where divider assemblies function as guards
- CSA structural design requirements including aluminum design provisions
- Applicable glass safety glazing standards
- Engineering review of structural divider assemblies
Finish options
- Factory powder-coat and Duracron, Acrynar, Duranar (XL) finishes meeting AAMA 2603, AAMA 2604 or AAMA 2605
- Standard and custom architectural colors available
- Textured and matte finishes supported
- Anodized finishes available upon request
Applications & advantages
Typical applications
- Balcony privacy dividers
- Podium terrace screening
- Wind mitigation panels
- Hospitality outdoor spaces
- Rooftop amenity areas
- Architectural façade screening
Advantages
- Structural privacy solution integrated with railing systems
- Multiple glazing and panel options
- Compatible with welded and mechanical PRO systems
- Durable exterior aluminum construction
- Modular installation
- Consistent architectural appearance
- Suitable for high-density residential environments
Short-form specification
Ready to paste into Section 05 73 00 (Decorative Metal Railings) or the guard schedule. Project-specific values (glass thickness, guard height, color) are left for the specifier to complete.
Guard system: RM-PRO™ DIVIDER Glass (Structural Aluminum Privacy Divider System), as manufactured by Railing Masters Inc., 110 Claireport Crescent, Unit 4, Etobicoke, Ontario.
Fabrication: Welded or mechanically fastened aluminum assemblies as required by project structural and design conditions.
Materials: Structural components of 6061-T6 aluminum (mechanically fastened assemblies) or weld-appropriate alloys 6061-T6, 6005A-T6 or 6063-T6 (welded assemblies); stainless steel fasteners and concealed hardware; isolation materials at all dissimilar-metal interfaces. Extrusions supplied by certified North American manufacturers with mill certification available.
Infill: Laminated safety glass or architectural panel infill as scheduled (clear, tinted, fritted, opaque or decorative), set within aluminum framing or channel.
Mounting and anchorage: Top-mounted or fascia-mounted to structural slab, steel framing or embedded plates. Anchorage engineered to project loading requirements; shop drawings showing anchorage layout and panel configuration to be submitted for review.
Performance: Designed to meet or exceed Ontario Building Code guard load provisions (OBC 4.1.5.14) and CSA S157 aluminum structural design. Independently field load tested (JRAMCO Inc., Field Test Report RT25-330-1111-01).
Finish: Factory-applied powder coat, Duracron, Acrynar or Duranar (XL) coating to AAMA 2603, 2604 or 2605 as scheduled; color per architect's selection.
Drawings & downloads
Stamped detail package covering this mounting condition, reviewed 31 July 2025 by F. Alibai, P.Eng. (PEO 100206138).
| Reference dimension | Value |
|---|---|
| Maximum height | 1800 mm |
| Divider post | 52 mm × 76 mm |
| Angle bracket | 3" × 3" × 2" × ¼" aluminum |
| Base anchorage | 2 × ½" Hilti KB TZ, 89 mm embedment |
Related systems
RM-PRO™ 3500MF-TM Glass
Full 6061-T6 structural capacity, with no weld heat-affected zones and concealed anchorage. Independently field load tested.
RM-PRO™ 3500MF-TM Picket
A structural picket guard in full 6061-T6, top- or fascia-mounted, for institutional and high-traffic buildings.
RM-PRO™ 3500MF-FM Glass
The premium façade system. Mechanically fastened 6061-T6 at the slab edge, engineered for difficult high-rise interfaces.
Send us the elevation. We'll send back the system.
Tell us the mounting condition, guard height and code jurisdiction. We'll come back with the recommended system, a stamped detail set and a materials list you can put straight into the spec.